Safety Car Seat Children Restraint from 9-36kg LM216

1. The customer can write to the address printed on the box to obtain future information on fitting the child restrain in specific cars.

2. The rigid items and plastic parts of a child restraint must be so located and installed that they are not liable, during everyday use of the vehicle to become trapped by a movable seat or in a door of the vehicle.

3. Any straps holding the restrain to the vehicle should be tight; that any straps restraining the child should be adjusted to the child's body; straps should not be twisted.

4.The instructions can be retained on the child restraint for its life period.

5.Do not use any load bearing contact points other than those described in the instructions and marked in the child restraint.

6.Any lap strap is worn low down, and the pelvis must be firmly engaged shall be stressed.

7.The device should be changed when it has been subject to violent stresses in an accident.

8.It is dangerous to make any alterations or additions to the device without the approval of the competent authority, and a danger of not following closely the installation instructions provided by the child restraint manufacturer.

9.When the chair is not provided with a textile cover, it should be kept away from sunlight, otherwise it may be too hot for the child's skin.

10.Children must not be left in their child restraint system unattended.

11.Any luggage or other objects liable to cause injuries in the event of a collision shall be properly secured.

12.The child restrain must not be used without the cover.

13.The seat cover can not be replaced with any other than the one recommended by the manufacturer, because the cover constitutes an integral part of the restraint performance.

14.IMPORTANT-DO NOT use forward facing before the child’s weight exceeds 9kg.